Built but not actually connected to anything. For the moment it is perfect. And perfectly quiet.
I assembled the parts this evening and went about the task of putting the guts into the mini-tower case I had picked. As with my current PC, I picked every component on this one, then assembled it myself.
The total time of assembly was bout three and a half hours, which was longer than anticipated. I expected this to be quicker and easier than the mini-ITX system I built five years ago. Wrong again!
The points where I had issues:
- Installing the heatsink/fan combo. This should be easy, as it’s just screwing in four screws to a plate mounted under the motherboard. But first I had to remove brackets for an alternate design. That was easy. Getting the four spring-loaded screws to screw in was not. I had to carefully balance each screw, lest the other side of the HSF suddenly pop up. This happened a lot. I finally got all four screws in when I realized I had to exert a certain amount of force on the HSF to keep it level, so it wouldn’t pop up. This took maybe 20-25 minutes alone. I can say with full confidence this is something I never want to do again.
- Installing the cables to the power supply. Easy in theory, but threading them from the motherboard and down to the PSU “shroud” proved difficult, as there is a drive cage mounted next to the PSU. I had to unscrew the PSU assembly and pull it partly out to get the cables connected.
- Plugging in the headers for Power LED, etc. These are labeled on the motherboard, but are virtually impossible to read because they are tiny and/or partly hidden by other components. I had to take several pictures and examine them closely to get everything connected. I think I got it right. Maybe.
These three things were, at times, maddening. And I haven’t even mentioned the IO shield, that infernal piece of aluminum that goes into a spot on the back of the case, and is designed to pop out 20 times before you can actually get it to stay in place. Despite these issues—which have convinced me to never build my own PC again—some aspects of the build were easy:
- RAM was a simple case of snapping in the modules, same as it’s ever been.
- The SSD is an M.2 drive, about the size of a stick of gum. It plugs directly into the motherboard and uses one tiny screw and support to keep it fastened in place. No power cables, no SATA cables, that’s it!
- The video card went in place quite easily. This is often the trickiest thing to get in, but the case had plenty of room for it.
As I write this it is 11:48 p.m. and I have powered off my current PC. I am not keen on hooking up the new PC yet. I’m not ready to go through the ritual of installing Windows. I’m even less ready to deal with inevitable BIOS errors, the video card not working and whatever else may go wrong.
I do not have a good feeling about this.
But for now, the PC is built and it is ready.
I am not.
But maybe tomorrow.
